Home - News - Details

Selection Method And Maintenance Techniques For Mining Hoisting Winches

The lifting winch is a device that lifts heavy objects by winding steel wire ropes or chains on a drum. It covers a small area and belongs to small and medium-sized lifting equipment. It plays an auxiliary role in lowering and lifting cement, sand, and stones. So, what are the general methods for selecting a mining hoist? What are the maintenance techniques for equipment? Below, we will have a detailed understanding of the selection methods and maintenance techniques for mining lifting winches.
How to choose a mining hoist
For those of you who frequently come into contact with mines, the term 'mining hoist' may sound very unfamiliar, but for those who frequently come into contact with mining hoist, mining hoist is a very common term. Today, the manufacturer of mining hoist wants to tell everyone how to select and configure resistors in mining hoist.
For mining lifting winches, they are mainly light and small lifting equipment that uses drums to wind steel wire ropes or lift or tow heavy objects. Therefore, they can also be called winches. Mining lifting winches have one or more water mounted machinery that can be used to wind ropes on drums, mainly used for material lifting or flat towing in buildings, water conservancy projects, mines, docks, etc, It brings a lot of convenience to people when lifting or lifting heavy objects. So, how to choose and configure the resistance of mining lifting winches
1. The rotor series resistance speed regulation method is often used in conjunction with mining lifting winches, as this speed regulation method is very simple and relatively easy to maintain. The selection of resistors should be based on the resistance value and allowable current value that can meet production requirements, and when configuring, it is required to use models with fewer resistance boxes and less maintenance workload.
2. The current capacity of the resistor should be configured as JC% as much as possible, and the long-term flow rate of the resistor should not be too small to avoid burning the resistor during use. Reasonable selection and configuration of the resistor can fully utilize the efficiency of the motor.

Send Inquiry

You Might Also Like